Floor Coatings

DESCRIPTION

When selecting the best floor coating for an area within a commercial or industrial facility, the conditions to which the area will be exposed must be considered. For permanent, thin concrete repairs use abe.® rep 710. Ideal for levelling or smoothing rough or worn concrete. Floor patching concrete repair up to 6 mm (do not feather-edge). Floor underlayment. Flooring for light traffic. Advantages include self-bonding, no curing required and no priming necessary. Used on concrete substrates for interior or exterior use. Can be used above and below grade.

PRODUCT SELECTION
PRODUCT APPLICATION TIME TYPE OF FINISH TYPE OF SOLUTION
abe.® cote tough epoxy
paint
Overcoat: 4 hours,
Hard dry: 24hours
different
colours, epoxy
2-part epoxy paint, on dry or damp substrates
abe.® cote clear
Polyurethane top coat
Overcoat: 2 hours,
Hard dry: 24hours
different
colours,
polyurethane
1-part PU paint, only dry substrates
abe.® clear tough
Polyurethane paint
Overcoat: 6 hours,
Hard dry: 24hours
clear,
polyurethane
2-part top coat for floor coverings: epoxy/PU
coatings, concrete, screeds, tiles, paving,etc.
abe.® seal finisol concrete
sealer
Overcoat: 4 hours,
Hard dry: 24hours
clear, acrylic
emulsion
1-part, concrete sealer that is moisture
insensitive (tolerant)
abe.® flooring resin
primer and sealer for
cement floors
Overcoat: 12 hours,
Hard dry: 24hours
clear, epoxy 2-part, primer and sealer for cement floors